How to Build an Efficient Alternative Energy Device


I spoke with Steve Elswick, the Publisher of the Extra Ordinary Technology Magazine;

Reading this article you will learn how I discovered what I now call an ion valve and how it is used in an extremely efficient tank circuit to greatly conserve the current to run motors or provide light. Tests show that motors can be run many times longer on a battery supply using the ion valve as a regulating component. I will not discuss actual numbers at this point in time. However, it is not too hard to envision a motor vehicle that used to travel 50 miles on a single battery charge that can now travel 200 miles, or a bank of light bulbs being powered up for several days on one 12 volt car battery.

You will notice that the ion valve component requires the opposite polarity to which Edwin Gray's switching tube is shown in his patent. It is not known if his patent was drawn showing this reverse polarity to protect the invention. However, it was reported that Gray did not want anyone to get too close to his device. It seems very likely that he did not want anyone to observe the correct operational polarity of his working device. The Gray conversion tube was designed to be an ultra fast switching component that can handle instant discharge of capacitors without quickly burning out, according to its patent description. The disadvantage of instantly dumping a capacitor's charge into a load is heat loss, as you will read in my article. The advantage is that power can be provided in a short duration burst. This is advantageous when used in a motor because a magnetic field can be timed when the rotor and stator are perfectly aligned, at which time, the most torque is obtained.This is how the Edwin Gray motor achieves it's effeciency. If current is applied to the rotor and stator before or after complete alignment, the current is wasted. There is no mysterious "radiant event" involved.

The advantage of my system over what is shown in the Gray patent is that heat loss is avoided. The plasma glow discharge conserves energy. Near perfect resonance can be achieved with the load. In this system there is no need to recover anything. The Gray system is a direct current (Edison) system, whereas, my system is a true alternating current (Tesla) system. You decide which system will become the alternative energy standard.

                      Bruce A. Perreault
                      December 30, 2003 - updated November 06, 2004


advanced_radiant_energy_circuitry.gif (13351 bytes)

Advanced Radiant Energy Power Circuitry

November 07, 2004

The circuit shown here will light up a home very economically. The ion-valve regulator shown in the circuit is an energy quenching device as I have described in my Fourth State of Matter Power Generation magazine article which allows the device to operate efficiently. Circuit deviations are possible and do not depart from the spirit of this device.

An ion-valve generator is included in the circuit that utilizes radioactive material that allows it to function as a state of the art atomic battery. This tube is the primary source of power. It's detailed construction is proprietary at this time. However, the circuit will still function without it as a highly effiecient lighting system.

When the ion-valve generator is included in the circuit, once the circuitry is primed by charging the source capacitor, energy can be feed back from the output to charge the 12 volt storage unit that is used to supply power the high frequency inverter.

 nuenergy_light_machine.gif (5726 bytes)

                                                                                          Improved Edwin Gray Circuitry



simplified_gray_circuit.gif (7089 bytes)

Simplified Edwin Gray Patent Circuit

The circuit drawn by Bruce A. Perreault at the left is without the distractions that are shown in the original Edwin Gray patent drawing shown below. This simplification gives a clear impression of how the circuit actually works. The the wire path represented by the red lines discharge the capacitor heating the central cathode rod. This has the effect of adding pulsed amperage to the tank circuit. Most of the discharge current is conserved by sending it through the source battery. The wire path represemted by the blue lines is the working load circuit. More advanced circuits will be posted.

gray2b.gif (6771 bytes)

                                                                                                                               Original Edwin Gray Patent Circuit




logo.gif (3392 bytes)

Nu Energy Horizons Alternative Energy Research
Nu Energy Technologies, P. O. Box 22, Rumney, New Hampshire 03266-0022 USA

Copyright © 2001, 2002, 2003 & 2004 All Rights Reserved Search made Simple

Subscribe to energy2000
Powered by